controller
Posted: 25 April 2018, 20:48I would like to use a controller to vary the methane conversion (rxn1) to achieve an exit concentration of 0.06868 in stream 5 from Reactor_1.
Thanks,
spadeace44
Thanks,
spadeace44
CAPE-OPEN
Discussions about use and implementation of the CAPE-OPEN standard
http://cape-open-forum.org/
controller
Page 1 of 1
Posted: 25 April 2018, 20:48Re: controller
Posted: 26 April 2018, 09:08Please look at , scroll down to Controlling conversion by manipulating PFR length. Now, instead of controlling the reactor length as in this example, vary the methane conversion, which is exposed as variable.