Page 1 of 1

controller

PostPosted: 25 April 2018, 20:48
by spadeace44
I would like to use a controller to vary the methane conversion (rxn1) to achieve an exit concentration of 0.06868 in stream 5 from Reactor_1.

Thanks,

spadeace44

Re: controller

PostPosted: 26 April 2018, 09:08
by jasper
Please look at https://www.cocosimulator.org/index_sample.html, scroll down to Controlling conversion by manipulating PFR length. Now, instead of controlling the reactor length as in this example, vary the methane conversion, which is exposed as variable.