CAPE-OPEN

Posted: **19 May 2013, 16:31**

When I connect three streams, the two manual streams add, but not the Energy Stream from the Gibbs Reactor. The three parameters on the Stream Report are identical for each of the four involved streams. Is there a hidden, secret parameter that is preventing this “illegal” combination of energies? What is it?

: Energy Mixer Questions; Energy Mixer (Forum).gif (31.82 KiB) Viewed 15980 times

Posted: **20 May 2013, 06:58**

This looks like a bug. Can you send the fsd file? Thank you.

Posted: **20 May 2013, 16:12**

I e-mailed the file. Hope you meet with success.

Posted: **20 May 2013, 19:57**

This was indeed a bug. Thank you for reporting the problem. It is now fixed. The update is available via CUP.

Posted: **21 May 2013, 19:07**

Posted: **21 May 2013, 20:07**

The energy mixer was changed. The number on stream six should say 354.999 kW.

The change log is always here

Your COUSCOUS dll version should say 2.5.0.15. If this is not the case, the DLL was not updated properly by CUP.

No need to re-insert the unit, just hit solve again.

Posted: **21 May 2013, 20:09**

CAPE-OPEN

Questions on Energy Mixer Unit Operation

Questions on Energy Mixer Unit Operation

Re: Questions on Energy Mixer Unit Operation

Re: Questions on Energy Mixer Unit Operation 1.1

Re: Questions on Energy Mixer Unit Operation

Re: Questions on Energy Mixer Unit Operation 1.2

Re: Questions on Energy Mixer Unit Operation

Re: Questions on Energy Mixer Unit Operation